Surfadol 400系列潤濕消泡劑
（咨詢電話：何忠林13901478300）
有效化學成分
環氧乙烷改性炔二醇類非離子型表面活性劑，主要用于底材及涂層之間的潤濕，提高接合性，同時具有抑泡、破泡功能。
性質
Surfadol 420 | Surfadol 440 | Surfadol 465 | Surfadol 485 | ||
外觀 | 無色至微黃色透明液體 | 無色至微黃色透明液體 | 無色至微黃色透明液體 | 白色至微黃色膏狀 | |
活性物含量(%) | 100 | 100 | 100 | 100 | |
濁點(5%溶液,℃) | 28 | 31 | 63 | ＞100 | |
密度(25℃) | 0.943 | 0.982 | 1.038 | 1.068 | |
粘度(cps, 20℃) | ＜250 | ＜200 | ＜200 | ＜350 | |
HLB值 | 4 | 8 | 13 | 17 | |
在水中的溶解性 | 不溶 | 微溶 | 可混溶 | 溶解 | |
平衡表面張力(dy/cm) | 0.01% | 41.3 | 44.6 | 47.0 | 52.1 |
0.1% | 32.0 | 33.2 | 41.9 | 51.1 | |
動態表面張力(0.1%,dy/cm, 6b/s) | 35.1 | 37.3 | 44.3 | 53.0 | |
特點
提高了產品的親水性，增加在水中的溶解度，改進潤濕和消泡性能；
因各自的乙氧化程度和在水中溶解度的不同，在起潤濕功能的同時，還可作為低泡、無泡或消泡潤濕劑；
適用于水/醇性膠粘劑、涂料和油墨等，也可用于某些溶劑型體系中；
不含APEO等，無毒。
使用方法
1、使用時應保證混合均勻。
2、如體系中加有其他表面活性劑等助劑，Surfadol 400系列應在末尾加入并混合均勻。
3、顏料、填料或其他固體，在Surfadol 400系列助劑加入并混合均勻后再加入，這樣可保證有效潤濕和抑制泡沫。
建議添加量
配方總量的0.2-2%，建議通過實驗確定。
包裝
25L塑桶，200L鐵桶，也可根據客戶要求批量包裝。
貯存
本品應置于干燥陰涼、通風良好的場所，遠離火源及氧化劑，開封后應盡快用完。
※本說明書中所述內容，據我們所知是真實的，但我們無法做任何保證，本說明書也不做為任何法律材料。
SurfadolMultifunctional Surfactant
Surfadol400 series defoaming wetting agent
Active ingredient
Acetylenic diols Ethoxylated non-ionic surfactant
Specifications
Surfadol 420 | Surfadol 440 | Surfadol 465 | Surfadol 485 | ||
Appearance | Clear & yellow liquid | Clear & yellow liquid | Clear & yellow liquid | White & yellow paste | |
Active ingredient (%) | 100 | 100 | 100 | 100 | |
Cloud point (5%solution,℃) | 28 | 31 | 63 | >100 | |
Density (25℃) | 0.943 | 0.982 | 1.038 | 1.068 | |
Viscosity (cps, 20℃) | ＜250 | ＜200 | ＜200 | <350 | |
HLB value | 4 | 8 | 13 | 17 | |
Solubility in water | Immiscible | Slightly soluble | Miscible | soluble | |
Static-surface tension (dynes/cm) | 0.01% | 41.3 | 44.6 | 47.0 | 52.1 |
0.1% | 32.0 | 33.2 | 41.9 | 51.1 | |
Dynamic surface tension (0.1%, dynes/cm, 6b/s) | 35.1 | 37.3 | 44.3 | 53.0 | |
Characteristic
l Increasing the hydrophilicity of the product, increasing the solubility in water, and improve wetting and defoaming properties.
l Due to the different solubility in water and ethylene oxide level, it can be used as low-foaming, no-foaming or defoaming wetting agent for water/alcohol-based adhesives, coatings and inks. Also can be used for some solvent-based systems.
l APEO free, non-toxic.
Usage method
1. Ensure sufficient mix when in use.
2. Surfadol400 should be added and mixed after other surface-active agents in system.
3. Pigments, fillers or other solid should be added after Surfadol 400 has been evenly mixed. It will ensure effective wetting and foam suppression.
Suggested Addition
0.2% - 2.0% wt. on total formula. Ultimate assessment and confirmation depend on experiments.
Packing
25kgs/plastic drum, 180kgs/iron drum.
We can also make batch packaging according to customer requirements.
Storage
This product should be placed in a cool, dry, ventilated place, away from the fire source and oxidant, used as soon as possible after opening.
上一頁：Defoamer T-202通用型消泡劑
下一頁：覆膜膠專用消泡劑HS-612